Senco FramePro 600E ThinkTrac
Clipped Head Nailer

Full Round Head Framing Nailers
Coil Nailers
Finishing Nailers
Clipped Head Framing Nailers
Related Items
See also
FramePro 700XL
See also
FramePro 600
See also
FramePro 750E-XL

FramePro 600 ThinkTrac Clipped Head Framing Nailer 
Senco FramePro ThinkTrac 600E   Smart trigger eliminates accidental firing.
Change from trigger to bounce fire on the fly!
Drives .113, .120, .131 and .148 shank sizes.
Excellent choice for all-around framing.
Fasteners for this tool: 2" - 3-1/2" Clipped Head Nails
FLEXIBILITY…You can operate in bottom or trigger fire mode without changing triggers or flipping a switch!
SPEED…You can drive at the rate of 8 nails per second.
SAFETY…ThinkTrac offers advanced safety; it’s unique microprocessor virtually eliminates unintentional nail drives and double fires.

ThinkTrac Technology: a state-of-the-art microprocessor chip that gives you flexibility and speed as you work. You can operate in bottom or trigger fire mode without changing triggers or flipping a switch and ThinkTrac tools are productive, they can drive at the rate of 8 nails per second. Safety is advanced because the microprocessor has a temporary "Time-Out" feature: if a nail isn't driven in the allotted time, the safety element and trigger must be reset before another nail can be driven. This virtually eliminates unintentional nail drives and in trigger fire mode-double fires. You're working fast-plus you're working smarter and safer!

ThinkTrac powered by 4 AAA batteries (included).  Batteries and electronics are water and shock resistant

Features:
The Senco FramePro 600E clipped head framing nailers provide all the important features you want at an affordable price. These compact nailers are easy to handle, and easy on the arm. Their 30° short, in-line magazines provide excellent maneuverability and line of sight. These powerful framers drive a wide range of fasteners  to handle virtually any job.  The FramePro 600E uses a solid driver rather than a blade, making it a excellent choice for driving hardened nails into concrete.

The Senco FramePro 600E framing nailer drives 2" - 3-1/2" smooth shank nails (Sencote® or plain) and 2" - 3" ring shank nails, 3" screw shank and clipped "D" head nails.  Shank diameters include .113, .120, .131, and .148.  

TOOL SPECIFICATIONS 
Height: 13-1/4" (336 mm) 
Length: 15" (381 mm) 
Weight: 8.0 lb (3.6 kg) 
Lip Length: 3/4" (19 mm) 
Fastener Capacity: 56—80, depending on gauge 
Reg. Operating Pressure: 
70—120 psig (4.8—8.3 bar) 
Collation: Paper Tape 
Adjustable depth-of-drive drives nails to a consistent and controllable depth 
Rugged 30° angled magazine easily reaches tight work areas 
Fast cycle time means higher productivity 
Aggressive toenail safety that really grabs the wood 
Includes No-Mar Pad
One year warranty


END OF PAGE