Senco 3 Tool Finishing Kit
SLS15 Staples
FinishPro 15 Brads
FinishPro 35 Finish Nails
See also SLS15 |
See also FinishPro 18 |
See also FinishPro 35 |
SLS15 shoots 18g. 1/4" crown staples (L wire) FinishPro 15 shoots 18g. 5/8" to 1-1/4" Brads FinishPro 35 shoots 15g. 1-1/4" to 2-1/2" finish nails $srch = "3n1";include("db_1_tool.php");?> |
Large Heavy-Duty Rolling Case • Holds all Three Tools • Retractable Handle • Nylon Velcro Straps • Front and Side Pockets • Divided Inside Sleeves • Heavy Duty Wheels FinshPro 35 (Tool in Center) The Senco FinishPro 35 angled finish nailer's lightweight, well-balanced construction enables the users to work all day by reducing fatigue and increasing productivity. The FinishPro 35 drives 1-1/4" — 2-1/2" finish nails for maximum versatility. Tool Specifications Power (in/lbs): 384 Height: 11.9" Length: 13.4" Weight: 4.7 lb Fastener Capacity: 110 Reg. Operating Pressure: 70—120 psig Features: • Adjustable depth-of-drive • Adjustable exhaust — Keeps oil and dust away from work surface • Full soft grip — For comfort and control • No-mar pad — To protect work materials • One-year warranty Applications: cabinets chair rails door and window casings exterior trim finish and trim molding and trim. Fasteners: Gauge: 15 Fastener Range:1-1/4 "— 2-1/2" FinshPro 15 (Tool on Left) This lightweight, power-packed brad nailer is loaded with all the features you need, plus a few more. The Senco FinishPro 15 drives 18 gauge brads from 5/8" to 1-1/4". Features: • Adjustable depth-of-drive • Rear exhaust - Keeps oil and dust away from work surface. • Easy-open latch - For quick and comfortable loading. • Hardened steel driver - For extended life. • Full soft grip - For comfort and control. • Low load indicator - Visible fastener indication. • No-mar pad - To protect work materials. • One-year warranty. Tool Specifications: Power (in/lbs): 120 Height: 7.5" Length: 10" Weight: 2.4 lb Fastener Capacity: 110 Reg. Operating Pressure: 70-120 psig Fastener specifications: Gauge: 18 Fastener Range: 5/8" - 1-1/4" Applications: Cabinets small trim furniture repair case backs baseboards chair rails picture frames ornamentals crafts SLS15 (Tool on Right) The versatile Senco SLS15 finish stapler weighs just 2.4 lbs, but can drive 1/2" - 1" staples into hard woods, making it the ideal stapler for a wide range of applications: Cabinets, soffit, fascia, drawer assembly, picture frames, case backs, craft assembly etc. Features: • Adjustable depth-of-drive. • Rear exhaust - Keeps oil and dust away from the work surface. • Easy-open latch - For quick loading. • Hardened steel driver - For extended life. • Full soft grip - For comfort and control. • Low load indicator - Visible fastener indicator. • No-mar pad - To protect work materials. • One-year warranty. Tool Specifications Power (in/lbs): 120 Height: 7.5" Length: 10" Weight: 2.4 lb Fastener Capacity: 100 Reg. Operating Pressure: 70—120 psig Fastener specifications: Gauge: 18 Crown: L wire 1/4" Fastener Range: 1/2 "- 1" Applications: Cabinets soffit fascia drawer assembly picture frames case backs craft assembly etc. |
END OF PAGE