Senco DuraSpin
DS200 Feed System

DuraSpin Screws
Corded DuraSpins
Cordless DuraSpins

Screw Bits, Adaptors
• Screw Guns:
   Senco 4000 RPM
   Senco 2500 RPM
   DeWALT 2500 RPM
See also
DS200-S2
See also
DS300-AC
See also
DS300

DS200 Feed System w/Case 
DuraSpin DS200 feed system DuraSpin DS200 feed system    Drywall - Sheathing
Drives 1" to 2" screws
Attaches to your screw shooter
Can be used with optional flooring extension
Includes molded carry case.
The SENCO DuraSpin DS200 Screw Gun Attachment is the ultimate screw-driving companion to your DeWalt, Milwaukee, Makita and Ryobi electric screw guns. Adaptors must be ordered seperately for Bosch and Sioux. The DS200 collated screw gun attachment drives screws ranging from 1" to 2" (25 mm to 50 mm) in length.

Includes DuraSpin Feed System, mounting adaptors and drive bits.

• Easy Depth-of-Drive Adjustment – Just turn the thumb screw to regulate the precise amount of countersink.
• Quick Release – Feed system snaps off to give easy bit access.
• Adjustable Nose Piece – Easily adjusts for screw sizes from 1" – 2" (25 mm – 50 mm).
• Super-Tough Drive Bits – Outlast the competition.
• SENCO’s Full One-Year Warranty.

DS200 feed system
Weight (without gun): 1.3 lbs (.6 kg)
Height: 7" (178 mm)
Length (without gun): 10 -1/2" (266 mm)
Width: 2" (50mm)
Drives 1" - 2" screws.

Screwguns and Adapters for DuraSpin Attachments
(2500 rpm best for wood screws - 4000 rpm best for drywall)

ELECTRIC CORDED TOOLS:
(Sorry - no cordless models)

DeWalt Adapter - MA0007*
DW251 (4000 rpm)
DW252 (4000 rpm)
DW257 (2500 rpm)
DW260K (2500 rpm)
DW265 (2500 rpm)
DW266 (2500 rpm)
DW272 (4000 rpm)
DW274 (4000 rpm)
DW274W (4000 rpm)
DW276 (2500 rpm)

Milwaukee Adapter - MA0009*
6755-1 (4000 rpm)
6757-1 (4000 rpm)
6758-6 (4000 rpm)

Bosch Adapter - MA0008
1404 VSR (4000 rpm)
1405 VSR (2500 rpm)
1420 VSR (4000 rpm)
1421 VSR (2500 rpm)

Makita Adapter - MA0011*
6823 (2500 rpm)
6824 (4500 rpm)
6825 (6000 rpm)

Porter Cable Adapter - MA0009*
6640 (4000 rpm)

SENCO Adapter - MA0012*
SG2500 (2500 rpm) Screw Gun included with the DS200-S2 and DS300-S2
SG4000 (4000 rpm) Screw Gun included with the DS200-S4 and DS300-S4

Ryobi Adapter - MA0012*
DSG50

PNEUMATIC TOOLS:

Sioux Adapter - MA0010
2P2603A (2000 rpm)
2P1603A (2600 rpm)
2P1303 (3350 rpm)

*Included with DuraSpin DS200 & DS300 Feed Systems.

NOTE: These model numbers are known to fit our adapters as of Jun 2004. There may well be others we are unaware of, and manufacturers can and do change their designs at will. We cannot, therefore, warrant that the feed system will always fit a listed model. SENCO DURASPIN June 2004 - RFS

END OF PAGE